What do you need to add your DSTAR ( DEXTRA/DPLUS ), DMR plus/TGIF/HBLink reflector( brandmeister DMR is not supported ) or Fusion YSF reflector to peanut.
- Install a Raspberry PI ( 3 or higher) with raspbian
- Connect an AMBE3000 stick like DVStick30 or ThumbDV ( I do not support illegal/fake chips or software encoders!! )
- I do NOT support software encoders!!
- Install the AMBEServer software ( make sure the AMBEServer survive a reboot )
- Open port 2460 UDP ( or other port ) on your firewall towards the raspberry PI
- Make sure the admin of the reflector gave you permission to link Peanut to his reflector!!!
- Make sure the AMBEServer and Reflector is behind a static public IP!! ( very important!! )
- Sent me the following information
Hints/Tips:
- Always check your AMBEServer status on the peanut dashboard. If the AMBEServer is not reachable for 15 days the link will be disabled by the system.
- See room name convention https://www.pa7lim.nl/rooms/
- Running a ( Fusion/DSTAR/DMR ) reflector on a raspberry PI is not going to work!
- AMBEServer setup https://github.com/nwdigitalradio/ambeserver-install
- Make sure the AMBEServer and Reflector is behind a static public IP!!
- dyndns or other dynamic dns servers are not supported!
For DSTAR
| Description of the reflector | This reflector is for HAM club XYZ |
| Hostname of the Raspberry PI | ambeserver.xlx707.net |
| Port of the AMBEServer | 2460 |
| Hostname of the DSTAR reflector | xlx.pa7lim.nl |
| Reflector name/mod ( DPLUS/DEXTRA ) | XLX707B |
| Admin name | David PA7LIM |
| Admin email | info@pa7lim.nl |
| Country ( 2 letter ) | NL |
| Make room on master ( Choose nearest ) | USA or Global |
For DMR plus, HBLink or TGIF. ( Only timeslot 2 )
| Description of the reflector | This is reflector 1234 for HAM club XYZ |
| Hostname of the Raspberry PI | ambeserver.myhost.com |
| Port of the AMBEServer | 2460 |
| Hostname of the DMR master | dmr1.dvscotland.net |
| Reflector or Talkgroup | Talkgroup |
| Reflector/Talkgroup number | 4445 ( < 99999 ) |
| Admin name | David PA7LIM |
| Admin email | info@pa7lim.nl |
| Country ( 2 letter ) | NL |
| Make room on master ( Choose nearest ) | USA or Global |
For Fusion ( YSF )
| Room name ( max 8 chars, must start with YSF ) | YSFSPAIN |
| Description of the reflector | This is reflector 1234 for HAM club XYZ |
| Hostname of the Raspberry PI ( AMBEServer ) | ambeserver.myhost.com |
| Port of the AMBEServer | 2460 |
| Hostname of the YSF reflector | dmr1.dvscotland.net |
| Port of the YSF Reflector | 42000 |
| Admin name | David PA7LIM |
| Admin email | info@pa7lim.nl |
| Country ( 2 letter ) | NL |
| Make room on master ( Choose nearest ) | USA or Global |
After you sent me the information, I will add your AMBEServer to the master. You will receive an email when the reflector is added.
Greets,
David PA7LIM